Bigfoot 1 (The Original Monster Truck, hobby project)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Bigfoot 1 (The Original Monster Truck, hobby project)
First things first. I am fully aware of Rep Fan's absolutely magnificent Bigfoot 1. I just wanted to make one with the 640 cubic inch engine instead of the 460 one.
Second, I have no deadline for this project, so don't expect me to post extremely regularly. I post when I get the time and feel the time is right for that.
Second, I have no deadline for this project, so don't expect me to post extremely regularly. I post when I get the time and feel the time is right for that.
You do not have the required permissions to view the files attached to this post.
Last edited by NorthernLonewolf on Fri Apr 07, 2023 12:49 am, edited 2 times in total.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Very early stage of the chassis. The wheel arches are being made, and enlarged to fit the 66" tires.

Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
First render... off to a start. This will also be purely for my own hobby. Any errors that I find will probably be corrected, in it's own time. As for now, I see the front wheel arch isn't flat in the middle, which I will correct. But that's for another day.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Tire tread fixed. Now, back onto the chassis. Shaping it into a Ford F-250 (1974-1979).
Edit: as seen in the second image, a bit more curved treads.
Edit: as seen in the second image, a bit more curved treads.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Last update for this time. The grille is being done.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Now the smaller 48" tires.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
The bigger one's... changed again.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
Re: Bigfoot 1 (The Original Monster Truck)
I'm confused, is this supposed to be for MTM2 or just a personal pet project? Either way, I hope you're still working with it and can't wait to see more, thank you for sharing your skills!
Admin of the MTM2 Draggers facebook page, find it here!
https://m.facebook.com/groups/337032006 ... =bookmarks
Nat Gage (She/They, pls)
I used to be PM Customs but now I'm taking meds for that ;)
https://m.facebook.com/groups/337032006 ... =bookmarks
Nat Gage (She/They, pls)
I used to be PM Customs but now I'm taking meds for that ;)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Hey there Gage! This is indeed a personal project of mine, but I am sharing it's progress here 
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
More progress on The Original Monster Truck. Note: I did NOT redo the treads again... I made another set of treads (which I believe were from the Goodyear-kind of tires, a bit more rigid and with some more bite) which were rather optimized for car crushing and off-roading.
You do not have the required permissions to view the files attached to this post.
Last edited by NorthernLonewolf on Thu Mar 17, 2022 2:00 pm, edited 1 time in total.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
... further updates on the tires, headlights and grille.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
After quite a while, I'm back onto modeling some on this. As I may have noted in the past, I'm basically modeling when I get into Monster Truck Madness 1 & 2 again 
Next up is probably the doors.
Next up is probably the doors.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
So I got the movie Road House in the mail today... and so my interest in monster trucks sparked into life again.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Rollbar added.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Side line added. More chrome as well.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
The 640 cubic inch (10.5 liters) engine.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck)
Inspired by the cover to the old 1987 VHS "The Living Legend - Bigfoot 4x4x4"
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck, hobby project)
A little bonus... the truck from Herbie Fully Loaded. A real nice leaf spring monster truck, a true old school monster. I read this truck earlier was called AM/PM Boss.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck, hobby project)
The Pride of Ford.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)
- NorthernLonewolf
- Member
- Posts: 99
- Joined: Fri Jun 22, 2007 10:56 am
Re: Bigfoot 1 (The Original Monster Truck, hobby project)
Here on some unknown mountain... tackling the elements.
You do not have the required permissions to view the files attached to this post.
Regards,
NorthernLonewolf (AKA Joker & Skull Kid)
NorthernLonewolf (AKA Joker & Skull Kid)