MTM2.com

sometimes when i hit the key to move in traxx and let go it keeps goin?? heh its iritating as hell when your tryin to do a cave of ground boxes.......

and to andy.... no thats not what i mean... thats an entirely diff thing this only moves like 2 or 3 squares......


------------------
Howd that cat get under my tire?

Yes, there is a thing in traxx that will do what Andy described. It's been a long time and I've forgotten the details. For your trouble though, my traxx doesn't do that, so it must be you.


------------------
- Phineus

grrrrr its still doin it.... this gets more and more iritatin......

i dont think it done it with 1.3 tho....

mabey i should go get 1.3 off a disk...

------------------
<IMG SRC="http://psyco.karf.net/sig.gif" border=0>

[email]psyco@karf.net?subject=mtmgbbs[/email]

Hmmm, maybe your keyboard is sticking?

thats a possiblilty but dont ya think it
wwwwoooouuuulllddd bbbeeee dddoooiiinnnggg ttthhiiss????

------------------
<IMG SRC="http://psyco.karf.net/sig.gif" border=0>

[email]psyco@karf.net?subject=mtmgbbs[/email]

mine does it too. it's rare but it happens.

Well, I have had this happen alot, but usually I can stop it by holding the other key, Say you where holding the UP arrow on the keyboard, well now this problem happens right? well now hold the bottom arrow, then use the "DOWN" botton to go below the ground level in traxx untill you stop, then start turning/twisting, it will go away without erasing traxx! :O)

Mine has done thar a few times also. But i have found out that it only happens when i am moving and accidentally right click on my mouse.

Why?... Because!

------------------
Keep on Monster Truckin'

EmceeMart

If it happens 2 me when i am moving and i right click, i just open the textures, models or patterns box (whichever is on the menu). It stops then.

------------------
Yours Mentally
SIG

Same thing happens to me, I just use SIGS suggestion.

I have the same problem sometimes, here's what I usualy do to stop it:

Just hit the save button and it stops.

But indeed it's iritating at some moments
when you rather don't want to hit save just yet, or under a different name because you're just testing so make sure autosave is turned on and use the traxxauto.txx file for it.

I hope this helps!

OOPS;-)

That can happen because the computer is hung up drawing the scene and doesn't register the keyboard release right away.
It might help to drop the Grid Size down when you are working in a tight place with lots of ground boxes etc (so it draws faster).
Also if you hit the key in the direction its already moving might stop it (because its <u>releasing</u> the key that stops the motion).
Hope that helps.