Help with Ground Box Problem plz

RustyBadMud · Post by **RustyBadMud** » Mon Feb 21, 2005 6:58 pm

I have redone the ground boxes, changed textures on it, raised and lowered ground level and I still get the same effect when testing the track. Does anyone have an idea or suggestion of what else I can try. Below is a picture of whats happening.

http://moore395.sasktelwebsite.net/Image2.jpg

Thanks,

Wint · Post by **Wint** » Mon Feb 21, 2005 7:03 pm

Howdy. You're not the first to bump up against that one. When the bottom value of the ground box penetrates below the water level of the track you will get that transparency effect, it's proportional to the depth the ground box is below the water level. In short, never use a bottom value that is less than the water height value, equal is fine.

RustyBadMud · Post by **RustyBadMud** » Tue Feb 22, 2005 7:06 pm

Thanks Wint, followed your instructions and fixed the problem.