someone willing to?

Kdawg · Post by **Kdawg** » Thu Jan 23, 2003 10:50 am

Is someone willing to make models if I gave a description of what i was looking for? Please let me know. Thanks

<font size=1>Edited by Kdawg (02-05-2003)</font>

Post by **Phineus** » Thu Jan 23, 2003 11:48 am

Most are willing. Time is the problem. What do you need?

Wint · Post by **Wint** » Fri Jan 24, 2003 7:29 pm

Yeah, what he said. I'd probably take a shot at simplistic stuff.

Kdawg · Post by **Kdawg** » Fri Jan 24, 2003 11:26 pm

Is there a way to make animated models have lights that are similar to transparent lights. Rotating like reos lights but not a solid color, like a transparent color? Also I need something else but don't know how to describe it. It is something from a game(non pc) but I don't know how to describe it so I've been trying to look for a picture but had no luck.

Post by **Phineus** » Fri Jan 24, 2003 11:46 pm

</center>

http://rhinoseros.com/~malibu350/scraps/Buildings.htm

That should do you just fine.

Kdawg · Post by **Kdawg** » Sat Jan 25, 2003 12:55 am

Whoa, the light part works but is there a way to make it so that it is actually only the light and not the light house? Not to be picky, but what i'm trying to do is make it like a stationary light sort of like one of those warning lights you might see in factories, ect..

Post by **Phineus** » Sat Jan 25, 2003 1:23 am

Already done. The house and the light are two separate models. Follow the instructions in the lighthouse.txt file and once you have the beam where you want it, delete the house.

Kdawg · Post by **Kdawg** » Fri May 02, 2003 7:27 am

Hey again,
Is anyone able to make some models for my expo? I need a pool ball rack.

Post by **Phineus** » Fri May 02, 2003 8:02 am

Got a picture?

Kdawg · Post by **Kdawg** » Fri May 02, 2003 8:33 am

Something like this

Malibu350 · Post by **Malibu350** » Sun May 11, 2003 5:45 am

Kdawg, I needed to make something very similar and it would be easy to convert it too a triangle rack... let me know if you still need it.

Kdawg · Post by **Kdawg** » Sun Jun 15, 2003 9:54 pm

can anyone make me a pool table brush? I am looking for something like this:
http://store4.yimg.com/I/cuesight_1740_112421435

Thanks to anyone that can

ZOtm_BigDOGGe · Post by **ZOtm_BigDOGGe** » Mon Jun 16, 2003 3:49 am

I probably could, but are there any other pictures? I can't quite see the shape of the bristles in that overhead view....is there a cut-out in the middle of the bristles for the trucks to pass through?

Any other pics?...perhaps a side view or profile or a sketch or something?

I have the wood handle finished already....I just need the above info.

Kdawg · Post by **Kdawg** » Mon Jun 16, 2003 8:23 pm

I don't know if that shows you enough, its the best i could find.
Yea, i was kinda hoping for the trucks to be able to travel underneath, its circular on the sides with the middle cut out just a bit. I wish i had a digital camera so i could take a picture of a friends but hopefully you can see it from this. I can resize it if need be.

ZOtm_BigDOGGe · Post by **ZOtm_BigDOGGe** » Mon Jun 16, 2003 8:44 pm

That picture is exactly what I needed....

OK, if you want the trucks to pass underneath, then I'll have to make the center section a little taller then the brush in the photo, so there will be enough room to pass beneath the handle....

I'll have it done in a day or two, if not sooner....

ZOtm_BigDOGGe · Post by **ZOtm_BigDOGGe** » Mon Jun 16, 2003 11:14 pm

Let's call it "sooner"......the brush is finished.

Please post your email address, soI can send it to you.

I also placed it on a small test track for inspection....it has collision boxes installed, and has been resized to a size that the truck fit beneath (80 feet wide)....I'll send you a copy, along with the BIN and texture files for the brush model..

Kdawg_ · Post by **Kdawg_** » Tue Jun 17, 2003 8:27 am

Squeeky628@aol.com

ZOtm_BigDOGGe · Post by **ZOtm_BigDOGGe** » Tue Jun 17, 2003 4:12 pm

Present has been sent......let me know if you want to exchange it....lol.

ZOtm_BigDOGGe · Post by **ZOtm_BigDOGGe** » Fri Jun 20, 2003 5:51 am

????

Did you ever receive the brush model>?........there's been no reply.

Wint · Post by **Wint** » Fri Aug 01, 2003 2:53 pm

In light of BigDOGGe's final words....

I've sent you a string of e-mails lately Kdawg, with attachments. I hope you've received them.