MTM2.com

Im having trouble with a track im trying to create. i cant seem to get the ramps to work. I pod the track but when I drive it, the truck goes through everything and the suspension gets all weird. Can somebody help?

what kind of ramps, like models that look like ramps, or actual ramp objects?

Did you do traxx school ? Have you looked at this page ?




http://cownap.com/~mtmg/traxx/type.html

Im using runts tutorial for drag tracks and using ramp models from other tracks.

This is what Runt says....


Ramps, Cars, Poles, etc.

... Now double click on it and set it from Default to No Collide... NEVER SET IT TO NO COLLIDE (FACING)!!! ...

Now we need to make the ramps effective. We're going to use the Purple Boxes. Go to a ramp, Right click and click insert. Now double click on that box and set it to 20 x 20 x 2. Move it around, use H and N to tilt it (it helps to get to the side of it to check) and double click on it and use the Above Ground up and down arrows to set it in just the right position. Do this for all the ramps. Right click and copy object, right click and paste object and align it and move around to make them effective.


What part are you having problems with ?

if you're using a stadium or dome model, MAKE SURE it is set to no collide, or it will mess up the truck.

Ok, but what do i set the purple blocks to. Default, No Collide, Ramp or what.

Leave them as default.