MTM2.com

I have redone the ground boxes, changed textures on it, raised and lowered ground level and I still get the same effect when testing the track. Does anyone have an idea or suggestion of what else I can try. Below is a picture of whats happening.

http://moore395.sasktelwebsite.net/Image2.jpg


Thanks,

Howdy. You're not the first to bump up against that one. When the bottom value of the ground box penetrates below the water level of the track you will get that transparency effect, it's proportional to the depth the ground box is below the water level. In short, never use a bottom value that is less than the water height value, equal is fine.

Thanks Wint, followed your instructions and fixed the problem.