My TrackED thing on my site isn't going to be up for a while so heres the instructions of changing the TrackED track logo.I've cut it down to the easiest way to make your own pics
This tell you everything from the response file to the making of the BMPs
----> The Big Picture
Open up PSP and click on New and change the following options....
Dimensions
Width = 257
Height = 210
Image Type = 256 colours (8 Bit)
You will now have a picture with the right dimensions & colours....
Make your picture and save the changes....
(Make sure you save as BMP)
----> The small picture
Open up PSP and click on New and change the following options....
Dimensions
Width=32
Height=24
Image Type 256 colours (8-Bit)
You will now have a picture with the right dimensions & colours....
Make your picture and save the changes....
(Make sure you save as BMP)
Thats how you make the right BMP Files
---> SIT Editing
In The SIT file you will find two sections that look something like this.This is from the Crazy98 SIT File....
Track Logo .BMP file
UI\Crazy98.bmp
Track Map .BMP file
UI\tn-98.bmp
Track Logo .BMP File is the bigger picture....
Track Map .BMP File is the smaller picture that goes next to the track name....
if you saved the big picture as MYLEV.BMP & the small picture as TN-MYLEV.BMP it will now look like this....
Track Logo .BMP file
UI\MYLEV.BMP
Track Map .BMP file
UI\TN-MYLEV.BMP
Save changes & exit....
Now go into TrackED and write a POD of your track.
Open WinPOD (if you haven't got it get it from my web page [http://come.to/HMTM2]
Open up the pod file of your track you created in TrackED2
Click extract
Then ONLY check the box Extract Reponse File
Click extract
Now exit WinPOD.
Open up Notepad
Open up the response File that you created from WinPOD in a text editor like NotePad
(If you named your POD File MYLEV.POD in TrackED the reponse Filename will be MYLEV.LST)
Go to the bottom of the list of files and if your filenames for the two BMP files were MYLEV.BMP & TN-MYLEV.BMP this is what the two lines at the bottom will be like
UI\MYLEV.BMP
UI\TN-MYLEV.BMP
Save Changes & exit
Open up WinPOD and open up the reponse file (lst)
(If an error message comes up you've written the two filenames in wrong)
Click On the Make button
Make your POD file
Exit WinPOD
Mount The POD
Play MTM2 (you now have your track logos on your track)
Any other TrackED2 problems? just give me an email
I will have my TrackED 2 section up in a while for everyone to see
*********************************************Can anyone take screenshots in TrackED because i need your help....
*********************************************
------------------
---> HAC-MAN
---> Keep On Hackin'
--->
Hacman@start.com.au --->
Http://come.to/HMTM2
