MTM2.com

k i am having trouble with these,In traxx i put the Model which was a Chopper about 70.2 above ground thing and i put moving but when i went to the game and played it,it just droped to the ground and kept on going how can i Fix this to make it be in the air??,Plz Help

------------------
<IMG SRC="http://jarodsmtm.web1000.com/sigs/bull.jpg" border=0> ON A MISSION

All moving models in mtm are trains. Therefore, the game will think any model you set to moving is supposed to be a train. And trains move along the ground, so any model you set to moving will also move along the ground.

But. If you use binedit and translate the model upward along the y-axis, then it will 'appear' off/above the ground in the game. I say appear because if you try to drive under it, you'll run into an invisible wall where the model extends downward.

k i downloaded Binedit_1_03 and i see a blue backgroud and its divide in to four sections and on one section i see these blue green and red lines and also this thing that says Current Vertix how would i get the model in there i tryed inserting it from file insert but i get this thing that says Error Loading BIN:
Could not find the texture "KICOPER.RAW"
in the folder "C:\Program Files\Microsoft games\monster truck madness\ART

------------------
<IMG SRC="http://jarodsmtm.web1000.com/sigs/bull.jpg" border=0> ON A MISSION

A good place for the basics.

http://rhinoseros.com/~mtmg/binedit/


You absolutely must set the program preferences so the art and models folders point to where you have the model files saved. You have to do this or it will crash for ever and ever.

http://rhinoseros.com/~mtmg/binedit/prefs.html


If you want to see 3D view only, you change that from the view menu. You don't have to do this, but if you're like me, I prefer 3D view and only use front/top/side when there's no way around it.

http://rhinoseros.com/~mtmg/binedit/menuview.html


Finally, to get to the point you want, open your model. You don't need to insert. Just open it like you would a text file in notepad.... only it's a bin model in binedit ;-)

After it's open, if you can't see it, goto the menu>view and select zoom to fit. It'll be there.

Then, on the menu, goto model and select translate. Click translate whole model, and numbers are in feet. Leave x and z at zero. Set y to 10 (or however many feet you want to raise it). Click OK and then save.

http://rhinoseros.com/~mtmg/binedit/translate.html

That's it.

Thnx alot Phin i got it working

------------------
<IMG SRC="http://jarodsmtm.web1000.com/sigs/bull.jpg" border=0> ON A MISSION